NUX NDL-5 JTC Drum & Loop PRO
JTC Drum & Loop PRO Dual Switch Looper Pedal
24-bit audio quality
6 hours recording time
256 memories
Drums: 25 4/4 beats, 10 3/4 drum beats, 5 shuffle beats
Drum tempo 40-240
2start modes, 3 stop modes
One shot player
2 Loop switch modes Record play and Record-Overhdub
Optional drum sound enchancement
2 outputs, Right Output speaker
emulated (optional)
3 Output metodes: Guitar to L and Drums to R, Guitar and Drums to R/L, Guitar and Drums
to R and Drums to L
External footswitch input to switch
between loop phrases
Micro-B USB Input
9V negative tip power input
High Quality Recording and Big Storage
JTC Pro is an advanced pedal with simplified controls. It’s a dual switch stomp box pedal with 6 hours
of recording capability and 256 loop track memories. And the audio recording quality is 24-bit and
44.1 kHz sample rate.
Dual-Switch Action
Loop and the drum controls are separated, left footswitch (LOOP) controls recording and overdubs,
and start/stop plays the recorded loop tracks. It’s also TAP Tempo control, you can set the drum
speed by tapping the left footswitch before you record a track.
High Quality Drum Sound - Smart Drum Fills
Right footswitch (RHYTHM) controls the drum and it adds a drum fill during the performance.
Drum fills length is one measure (depends on 4/4 or 3/4 rhythms). When you hit the RHYTHM button,
drum fill will start immediately and it will play until the end of the current bar. For example if you push
the switch at 3rd beat -> drums fill length will be 2 beats only.
There are 40 drum patterns and fills including Pop, Rock, Blues, Metal and more other styles
with 3/4 and 4/4 beats.
Start/Stop Modes
It has very useful and stop modes for making your jam sounds like an arranged song during the performance.
There are 2 Start Modes and 3 Stop Modes;
Normal Recording - Classic hit and play looper action.
Auto-Recording - Hit the footswitch first, JTC Pro will stand by until you hit the guitar strings.
And it will start to record with no delay when you hit the first notes. You can wait as long as you want,
until you feel ready to play.
Press and hold the Stop Modes button, and select the start mode; (Ar) Auto-Recording, (Nr) Normal Recording
After you record a track, you can simply push the Stop Modes button, and choose one of the modes to
finish your performance the way you like.
Normal Stop - Double hit to Loop footswitch and the looping track will stop immediately.
Fine Stop - Double hit: The track will play until the end then it will stop, don't forget to hit finishing
chord after it stop.
Fade Out - The track volume will be decreased to 0 slowly in 10 seconds then it will stop.
ONE-SHOT- Mode
And, One Shot mode for playing any loaded backing track without looping. You can load any song to play along,
the supported file type is 24-bit 44.1 kHz Stereo Wave (.wav)
You can download NUX Audio File Converter to change the file format. (It doesn't process the audio signal,
it changes the file ID and JTC Pro can recognize the file to play. Main file must be .wav or .mp3 format, please
check the support page for converter guide)
Advanced Output Options and Frequency Optimization (FR ON/OFF)
JTC Pro has 2 outputs and there are several output modes; a stereo connection to two amplifiers, or you
can activate the built-in speaker cabinet simulation for Right Output to send your guitar signal directly to
a PA system (or any PA monitor).
JTC Pro’s drum sound is high quality real sound, when you connect to any guitar amplifier or PA system you
will hear a full range and dynamic drum sounds, still, if you are using a small practice amplifier there is
an optional drum frequency optimization. It makes the drum sounds more clear and helps you to get
a real looper experience with the smaller amplifiers
You will find a guide about Output routing and Frequency Optimization on the support page.
External Footswitch Input
You can connect NUX NMP-2 control footswitch (sold separately) or any equal pedal to use as a controller.
You can switch Up and Down between the memory slots.
When you push the UP or DOWN button, the current track will be played until the end, you can switch right
next to preset or jump between several presets at once
NUX A/B ROLL – Loop, oktav og IR i én kreativ pedal
– Polyfonisk suboktav med dedikert nivåkontroll
– 7 IR-presets + støtte for egne IR-filer via USB
– Auto Rec Mode – opptaket starter når du begynner å spille
– USB-C med OTG-støtte for opptak og deling
– 1/8” hodetelefonutgang for stille øving
– 24-bit / 48 kHz lydkvalitet
– Kompakt design med lavt strømforbruk (<100 mA)
Loopetid: Opptil 6 minutter, ubegrensede overdubs
NUX A/B ROLL Octave & Loop er en kompakt og kraftig pedal som kombinerer looping, polyfonisk suboktav, og
IR-kabinett-simulering i ett komplett verktøy. Enten du er gitarist, bassist, låtskriver eller hobbyspiller, gir
A/B ROLL deg fleksible funksjoner for både øving, opptak og livebruk – alt pakket i et pedalbrett-vennlig format.
Pedalen er inspirert av kreativiteten og eksperimenteringen som preget Abbey Road Studios – og navnet “A/B ROLL” er
en liten hyllest til nettopp det.
Fleksibel looper med automatisk opptak
Med opptil 6 minutters loopetid og ubegrensede overdubs kan du bygge komplekse arrangementer eller fange idéer i
farten. Pedalen støtter både manuelt opptak og Auto Rec Mode, der opptaket starter automatisk idet du begynner å
spille. Du kan justere følsomheten for automatisk opptak direkte på pedalen – helt uten app eller meny.
Dypere lyd med suboktav
A/B ROLL lar deg blande inn en polyfonisk suboktav som gir mer fylde og dybde til både riff og loops – perfekt for
både gitar og bass. Nivået justeres enkelt med en dedikert SUB-knapp.
Innebygd IR-kabinett-simulering
Med 7 forhåndsinstallerte IR-presets får du klassiske kabinettlyder rett ut av boksen. Du kan også laste inn egne
IR-filer via USB og redigere dem i gratisprogramvaren IR Manager. Dette gir deg full kontroll over klangen – både i
øving og på scenen.
Praktiske tilkoblinger og lydkvalitet
Pedalen har 1/8" hodetelefonutgang for stille øving med ekte kabinettfølelse. I tillegg støtter den USB-C med OTG,
slik at du kan ta opp og dele lyd direkte til mobilen eller datamaskinen. Lydopptaket er i 24-bit / 48 kHz, som gir
høy lydkvalitet både i opptak og under looping.
DSP: 48 kHz / 32-bit
A/D og D/A: 48 kHz / 24-bit
Inngangsimpedans: 1 MO
Utgangsimpedans: 10 kO
Hodetelefonutgang: 10 O
Dynamikkområde: 103 dB
Strøm: 9V DC (senter negativ)
Strømforbruk: <100 mA
Mål: 94 × 51 × 53 mm
Vekt: 175 g
