Kategorier

Legendarisk Gitar Modell

Det har i den senere tid blitt veldig populært med gitarer som har et gammelt utseende. AVN6 er en slik modell og gitaren ser ut som den er produserrt på 30-40 tallet. AVN6 har en åpen og fyldig klang og er den perfekte gitaren for bl.a fingerpicking og slidespilling. Kropp: Hel gran i lokket, sarg og bunn i mahogni. Hals: Mahogni / 25" skala Mekanikk: Antique chrome open gear Farge: DTS Distressed Tobacco Sunburst - Open pore --- SPEC body shape Parlor body top Solid Sitka Spruce top back & sides Mahogany back & sides neck Mahogany Soft-V shape neck w/Diamond volute fretboard Rosewood soundhole rosette Herringbone tuning machine Antique Chrome Tuners w/Oval knobs bridge pins Ibanez Advantage™ Bridge pin strings D'Addario® EXP™11 Coated 80/20 Bronze, Light (.012-.053 Gauge) Neck Dimensions Scale 634mm a : Width at Nut 43mm b : Width at 14th Fret 55mm c : Thickness at 1st 21mm d : Thickness at 7th 22mm Radius 400mmR Body Dimensions a : Length 19 1/2" b : Width 14 1/4" c : Max Depth 5" Others •Dovetail Neck Joint Recommended Case/Bag •AC100C . FEATURES

Tradisjonelt utformet med samme lyd og design som modellene på 40-tallet. Med East Indian rosewood i gripebrettet, Martins A-frame X-bracing og heltre mahogni i lokk og kropp leveres den vintage-tonen som er betegnende for Martin-historien. Martins 15 Series vil garantert tilfredsstille old-school-gitarentusiastene. Model: 000-15M ---- Tilfredsstill ønsket ditt med en rimelig gitar i heltre som er visuelt særegen og nyskapende. Body Size: 000-14 Fret Finish Top: Satin Construction: Simple Dovetail Neck Joint Back and Side Finish: Satin Bracing Pattern: X-Brace Scale Length: 25.4" Brace Shape: Non-Scalloped Fingerboard Width at Nut: 1 11/16'' Top Material: Mahogany Neck Shape: Modified Low Oval Back Material: Mahogany Neck Taper: Standard Taper Side Material: Mahogany

Martin 00-18 er en klassisk Grand Concert akustisk gitar med lokk i heltre gran og sider og bunn i heltre mahogni som gir en balansert tone med lyse diskanter og varm bass. Den er ideell for fingerstyle og klimpring, og har Golden Era (GE) toppavstivning for vintage-inspirert tone og sustain. Den satengbehandlede halsen med en GE Modified Low Oval-profil og 24,9" skalalengde sikrer jevn spillbarhet. Gripebrett, bro og bropinner i ibenholt med abalone-dot-innlegg bidrar til det tidløse utseendet. Inkluderer hardcase-etui. 00-14 Fret design Lokk i heltre gran GE-Scalloped X-Bracing Sider og bunn i heltre mahogni Blank finish 24.9" skala 4,45 cm ved oversadelen Hardcase

handmade dreadnought guitar, solid spruce & mahogany, satin finish Richwood Master Series are all handmade acoustic guitars, made of premium selected tonewoods, professionally set-up before packing. Our D-20 model is built to the same high standards we apply to all our instruments. The result is a great sounding and very stable guitar that has its strong points in the strumming playing style. As any dreadnought shaped guitar, the mid frequencies are very present, giving the D-20 a full sound and long sustain. Of course you can play any style on this instrument, but it really shines on strumming techniques. The thinly applied satin finish, the solid sitka spruce top and mahogany sides result in a light and lively sounding instrument that will accompany you for many years to come. The technical and aesthetical advanced features include bone fittings, a double action trussrod, voluted headstock joint, cotton capped X-braces, mahogany back braces, high grade Derjung machine heads, USA D'Addario EXP16 coated phosphor bronze strings. One of our specialties in guitar building are the extreme measures we take into drying the wood before we start building your instrument. Richwood Master Series stand out in tone, playability an stability. Try one today! specs body shape: dreadnought bracing design: X scalloped, with mahogany back braces scale length: 650 mm neck width : 43,6 mm body length: 500 mm lower bout width: 405 mm body thickness: 96/120 mm top material: solid A grade Sitka spruce back & side material: laminated mahogany neck material: Indonesian mahogany fingerboard material: Indian rosewood fingerboard binding material: Indian rosewood fingerboard radius: 14' bridge material: Indian rosewood top color: natural body finishing: satin open pore neck finish: satin rosette: heringbone ring top purfling: no side binding: black back binding: black trussrod: active two-way top position dots: 7 mm + 5 mm white pearl shell side position dots: 2 mm white pearl shell frets: 2.4*1.1 mm 18% nickel silver nut & saddle material : enuine boneg machine head: Derjung Deluxe chrome strings: D'Addario EXP-16 bridge pins: black color, white core pickguard: imported 114 tortoise D strap button : chrome extra : additional genuine bone saddle and 1 x saddle underlayment

handmade dreadnought guitar, solid spruce & mahogany, gloss finish Richwood Master Series are all handmade acoustic guitars, made of premium selected tonewoods, professionally set-up before packing. Our D-40 guitar is built from the same wood combination as the D-20. The appointments are a bit more luxurious and the sound however is tighter and more focussed due to the gloss lacquer. The effect of satin of gloss lacquer is very clear in this comparison. Where the D-20 is light sounding, the D-40 has more focus and has a high register that has more body. The traditional dreadnought shape is perfect for strumming or any flatpicking techniques. The big body can be driven perfectly with a pick. The sound will have a lot of low-end that carries well. Of course you can play fingerstyle on a dreadnought, but if you play fingerstyle solely, we recommend our A or P models. The solid sitka spruce top and the mahogany sides and back sound lively and light with a more focussed sound than our D-20 guitar. Try one and we’re sure you have found a partner for years to come. The technical and aesthetical advanced features include bone fittings, a double action trussrod, voluted headstock joint, cotton capped X-braces, mahogany back braces, high grade Derjung machine heads, USA D'Addario EXP16 coated phosphor bronze strings. specs body shape : dreadnought bracing design : X scalloped, with mahogany back braces scale length: 650 mm nut width : 43,6 mm body length : 500 mm lower bout width: 405 mm body thickness : 96/120 mm top material: solid A grade Sitka spruce back & side material : laminated mahogany neck material : Indonesian mahogany fingerboard material : Indian rosewood fingerboard binding material : Indian rosewood fingerboard radius : 14" bridge material : Indian rosewood top color : natural body finishing : glossy neck finish : satin rosette : 3 rings black & ivory top purfling : 3-ply side binding : black back binding : black trussrod : active two-way top position dots : 7 mm + 5 mm white pearl shell side position dots : 2 mm white pearl shell frets : 2.4*1.1 mm 18% nickel silver nut & saddle material : genuine bone machine heads : Derjung Deluxe chrome strings : D'Addario EXP-16 bridge pins : black color, white core pickguard : imported 129 black D strap button : chrome

handmade dreadnought guitar, solid spruce & rosewood, ebony fb, real abalone, vintage aged Richwood Master Series are all handmade acoustic guitars, made of premium selected tonewoods, professionally set-up before packing. Our D-70-VA model is a the top instrument of the Master Series. It features an AA solid sitka spruce top, Indian rosewood sides and back, ebony fingerboard and bridge and extensive real abalone inlays. Due to the wood choice, these instruments respond and project exceptionally well. Again an instrument that will positively amaze you when you pick it up. The dreadnought is commonly seen as a strumming instrument. The loud tone and the bold and sonorous low end really shine when played with a pick. The big body gives the D-70 a full sound with lots of detail and lots of dynamics. The technical and aesthetical advanced features include bone fittings, a double action trussrod, voluted headstock joint, cotton capped X-braces, mahogany back braces, high grade Derjung machine heads, USA D'Addario EXP16 coated phosphor bronze strings. Specs body shape: dreadnought bracing design: X scalloped, with mahogany back braces scale length: 650 mm nut width: 43,6 mm body length: 500 mm lower bout width: 405 mm body thickness: 96/120 mm top material: solid AA grade Sitka spruce back & side material: laminated rosewood neck material: Indonesian mahogany fingerboard material: ebony fingerboard binding material: ivoroid ABS fingerboard radius: 14" bridge material: ebony top colour: vintage aged body finishing: gloss neck finish: satin rosette: 3 rings model with real abalone top purfling: real abalone side binding: ivory ABS back binding: ivory ABS back seam: zipper trussrod: active two-way top position dots: real abalone hexagons side position dots: 2 mm black frets: 2.4*1.1 mm 18% nickel silver nut & saddle material: bone 43*6 mm and 72*3 mm machine head: Derjung Deluxe gold strings: D'Addario EXP-16 bridge pins: black colour, white core pickguard: imported 129 tortoise strap button: gold extra : additional genuine bone saddle and 1 x saddle underlayment

dreadnought guitar with solid spruce top, black Step into the world of timeless class with the Richwood Dreadnought Heritage guitar. With its beautiful pearloid headstock and refined finish, this guitar embodies the essence of heritage and craftsmanship. Experience a rich, warm tone and smooth playability that will inspire any musician. Whether you are a seasoned professional or just starting out, the Richwood Heritage guitar is your ticket to musical perfection. Discover the harmonious harmonies and timeless style of Richwood Heritage Series today. Top: Solid Spruce Back&Sides: Sapele Neck: Mahogany Fingerboard: Purple Heart Bridge: Rosewood Finishing: Gloss Strings: D'Addario EXP-16 Machine Head: Covered Tuners

parlor guitar with solid spruce top, mint green Top: Solid Spruce Back&Sides: Sapele Neck: Mahogany Fingerboard: Purple Heart Bridge: Rosewood Finishing: Gloss Strings: D'Addario EXP-16 Machine Head: Covered Tuners