Du er her: Forsiden
•Bow screw •With nut •125 mm long •Metric thread
125 kr
- +
•Bow screw •With three part nickel silver leg for French frog
315 kr
- +
•Bow screw •With one part hard rubber leg for German frog
325 kr
- +
120 kr
- +
For guitars with flat headstock Covered single machine heads Large Schaller button For 8 mm bore Set 3 left, 3 right
349 kr
- +
For guitars with flat headstock Perfect for repairing older guitars with non-standardised shaft spans Nickel-plated metal buttons Shaft diameter 6,1 mm For 8 mm bore Covered single machine heads, chrome-plated, set 6 pcs left
425 kr
- +
- For guitars with flat headstock - Diecast single machine heads - Large Grover button - For 10 mm bore - Set 3 left, 3 right
539 kr
- +
- For guitars with flat headstock - Diecast single machine heads - Large Schaller button - For 10 mm bore - Set 3 left, 3 right
539 kr
- +
78 kr
- +
Replacement machine head for mandolin, mandola, bouzouki For slotted headstock, nickel plated Marbled acrylic buttons Can be used for 505.395, 505.397, 505.399, 505.492, 513.970 Shaft distance 23 mm, diameter 6 mm, length 21 mm Original Van Gent, Netherlands Delivered as set
190 kr
- +
For mandolins with slotted headstock Double drilled metal shafts, diameter 6,1 mm, shaft span 23 mm Price per set Gold plated, marbled acrylic buttons
520 kr
- +
• Arm Length: 33cm • Clip Width: 11,5-19cm
410 kr
- +
175 kr
- +
1 590 kr
- +
1 125 kr
- +
315 kr
- +
Gaucho Buffalo III Series. Stilrene gitar reim med polstret bakside for beste komfort. Lær reim av høyeste kvalitet.
490 kr
- +
250 kr
- +
450 kr
- +
En aktiv mellomklassehøyttaler for nærfelt som også egner seg godt til installasjon. Stort utvalg i spesialtilpassede vegg, tak og gulvstativer. - OBS! Vi gjør oppmerksom på at alle priser oppgitt på høyttalere er pr stk. - 8030A er en liten, men kraftig og aktivt 2-veis høyttaler både for stereo i nærfelt og 5.1 i fjernfelt. Den har 5” basselement og 3/4” diskantelement. Volumkontroll og power på/av i front. Den yter hele 80W og gir et lydtrykk på 100 dB SPL (108 dB pr. par) og har frekvensgang +/-2 dB fra 58Hz til 20kHz. Leveres i fargene: sort, hvitt og sølv. Vekt: 5,6 kg. Høyde m/Isopod 299 mm, høyde u/Isopod 285 mm, bredde 189 mm, dybde 178 mm.
5 995 kr
- +
The Aspirante line - the case that should accompany beginners and students. - Styrofoam-shell, equipped with all necessary features. Quality GEWA parts, screw-attached cover with carbon trimmings. - - Styrofoam shell - Padded suspension system - Weight ca. 1,2 kg -Water-repellent screw-attached cover, carbon optics - Small music sheet pocket, reflector strips, magnetic press buttons - GEWA patented swivel-type holder, flexible bow holder - Blanket - 2 sewn-on rucksack straps - Address card compartment - Indication of size at the bottom
1 095 kr
- +
8 bells Orchestra model
269 kr
- +
Classical retro-design Diameter 7" and 8,5" Natural heads 4 tension rods each
795 kr
- +
Better wood quality Selected maple from Bosnia /Serbia/Montenegro Seasoned wood Mirror cut Blank Normal heart Standard shape
125 kr
- +
4/4 size Best selected wood quality Selected maple from Bosnia /Serbia/Montenegro Seasoned wood Mirror cut Blank Normal heart Resonance shape
379 kr
- +
4/4 size Selected wood quality Selected maple from Bosnia /Serbia/Montenegro Seasoned wood Mirror cut Blank Normal heart Resonance shape
210 kr
- +
- Cordura 600 Denier, black - Tear- and waterproof - All carrying parts specially reinforced - Carrying strap with shoulder pad - 3 interior pockets - Additional outer pocket with velcro fastener
230 kr
- +
- High quality Cordura 1680 Denier - 30 mm High-Density foam padding - Innovative Diagonal design - All carrying parts reinforced - Tearproof and water protected - GEWA NPS (Neck Protection System) - Additional protection in machine head and bridge area - Completely padded, adjustable, attached deluxe rucksack straps - Large music sheet/accessory pocket - Shock-absorber - High-quality black fleece lining - Black
1 295 kr
- +
18 kr
- +
650 kr
- +
Wooden shell, sturdy, arched lid, stitched all round Chrome plated locks, 3 lid hinges Screw-attached rubber feet Sturdy synthetic handle Matt black, shagreened imitation leather cover, accessory compartment with lid Interior padding black plush Metal loops for carrying strap (strap not included) GEWA brass logo plate
1 595 kr
- +
Klassisk Gitar, Nylon Strengs --- Wooden core, sturdy flat lid, sewn all around Chrome plated locks, 3 lid hinges Screw-attached rubber feet Sturdy plastic handle Matte black, grained imitation leather cover, accessory compartment with lid Interior padding black velvet GEWA brass logo plate
1 295 kr
- +
Wooden shell, sturdy, flat lid, stitched all round Chrome plated locks, 3 lid hinges Screw-attached rubber feet Sturdy synthetic handle Matt black, shagreened imitation leather cover, accessory compartment with lid Interior padding black velvet GEWA brass logo plate
1 275 kr
- +
Flat Top, Sort Tolex, SG El.Gitar
1 225 kr
- +
Wooden shell, sturdy, flat lid, stitched all round Chrome plated locks, 3 lid hinges Screw-attached rubber feet Sturdy synthetic handle Matt black, shagreened imitation leather cover, accessory compartment with lid Interior padding black velvet GEWA brass logo plate
1 225 kr
- +
Sort Tolex, El.Bass Gitar
1 425 kr
- +
Sort Tolex, El.Gitar
1 295 kr
- +
- Bonoid bridge inlay - Synthetic material (similar to TUSQ), with a high percentage of glas - Extremely hard, compact and very harmonic - Used f.ex. for VGS acoustic guitars - Acoustic guitar 71,5 x 3 x 6 - 7,3 mm
60 kr
- +
79 kr
- +
- Gamba shape - Laminated spruce top - Arched, laminated maple back - Tyrolean machine heads - Wider ebony fingerboard - Fingerboard markings / Dots as indication - Satin black finish - Nuremberger precision strings - Special strings upon request possible - Bridge height adjustable - Pickups can be added optionally - Set up in GEWA master workshops
22 900 kr
- +
Maple with brass fretwire layer
50 kr
- +
Wooden shell, sturdy lid, continously stitched 2 locks, one lockable 2 lid hinges, metal feet, sturdy synthetic grip Matt black, shagreened imitation leather cover Accessory compartment, Interior black velvet
1 195 kr
- +
High-quality twine Wooden shaft 39 cm Soft Pair
689 kr
- +
High-quality twine Wooden shaft 39 cm Very hard Pair
769 kr
- +
Brush Metal wire
18 kr
- +
Brush Metal wire
26 kr
- +
Felt head 30 mm Plastic stick Length 30 cm Single
155 kr
- +
Made in traditional wooden construction, the model GEWA Oxford is an absolute classic. Its elegant shape, slim and rounded, speaks for itself and meets all requirements. With its elementary black interior and the removable accessory compartment, the traditional outer shell is complemented by modern details. - This violin case was devised by our Saxon development team and is perfect for musicians and students that put great emphasis on break resistance and good insulation. - Inside you find sufficient space for 4 bows, accessory pocket, shoulder rest and other equipment. The detachable rucksack fittings, the side handle as well as the soft handle offer an excellent wearing comfort for all occasions. - With the violin case Oxford you own a solid violin case. - Medium weight. - - Wooden shell - Padded suspension system - Weight ca. 2,4 kg without accessories - Water-repellent, screw-attached cover with music sheet pocket - GEWA patented swivel-type holder - Flexible bow holder - Useful, removable accessory bag - 2 detachable rucksack straps - Inside black warp pile velvet
4 415 kr
- +
Felt head white 70 mm Aluminium stick with rubber grip, 30 cm long Single
480 kr
- +
- Cork head wrapped with high-quality felt - Diameter: 35 mm - Beech shaft, length 36 cm - Including rubber cuff - Pair
615 kr
- +
- Cork head wrapped with high-quality felt - Diameter: 35 mm - Beech shaft, length 36 cm - Including rubber cuff - Pair
420 kr
- +
- Cork head wrapped with high-quality felt - Diameter: 30 mm - Beech shaft, length 36 cm - Including rubber cuff - Pair
420 kr
- +
High quality Cordura 600 Denier 20 mm High-Density foam padding All carrying parts reinforced Tearproof and water protected GEWA NPS (Neck Protection System) Fluff-free honey comb inner lining, anthracite Additional protection in machine head and bridge area Sturdy comfort carrying handle, additional front handle Completely padded, adjustable, attached deluxe rucksack straps Large music sheet/accessory pocket Shock-absorber Stitched GEWA-Logo
879 kr
- +
High quality Cordura 600 Denier 20 mm High-Density foam padding All carrying parts reinforced Tearproof and water protected GEWA NPS (Neck Protection System) Fluff-free honey comb inner lining, anthracite Additional protection in machine head and bridge area Sturdy comfort carrying handle, additional front handle Completely padded, adjustable, attached deluxe rucksack straps Large music sheet/accessory pocket Shock-absorber Stitched GEWA-Logo
879 kr
- +
Wooden shell, sturdy, arched lid, stitched all round Gold plated locks, 1 combination lock 2 lid hinges 9 metal feet Side metal loops for carrying strap (strap not included) Comfortable soft handle Black, shagreened imitation leather cover Accessory compartment with lid, interior padding blue plush GEWA brass logo plate
1 895 kr
- +
Wooden shell, sturdy, arched lid, stitched all round Gold plated locks, 1 combination lock 2 lid hinges 9 metal feet Side metal loops for carrying strap (strap not included) Comfortable soft handle Black, shagreened imitation leather cover Accessory compartment with lid, interior padding blue plush GEWA brass logo plate
1 995 kr
- +
•Chrome-plated steel shell •Coated REMO batter head •14x6,5" •10 tension rods on each side
1 095 kr
- +
1 425 kr
- +
The polycarbonate case guarantees the safety of the instrument in every situation. The shell is made of a polycarbonate sandwich that is injected with polyurethane foam. This makes the case not only very light and stable, but also very temperature resistant. The sturdy main handle and the side handle allow for easy handling. The well-made neoprene padded backpack straps make it very comfortable to carry. - - Outer shell made of polycarbonate - Weight approx. 1.8 kg - Padded suspension system - Flexible GEWA bow bridge - GEWA swivel type holder - Detachable accessory pouch - Stable main handle and side handle - 2 detachable rucksack straps - Silk blanket - Black interior
3 195 kr
- +
The polycarbonate case guarantees the safety of the instrument in every situation. The shell is made of a polycarbonate sandwich that is injected with polyurethane foam. This makes the case not only very light and stable, but also very temperature resistant. The sturdy main handle and the side handle allow for easy handling. The well-made neoprene padded backpack straps make it very comfortable to carry. - - Outer shell made of polycarbonate - Weight approx. 1.8 kg - Padded suspension system - Flexible GEWA bow bridge - GEWA swivel type holder - Detachable accessory pouch - Stable main handle and side handle - 2 detachable rucksack straps - Silk blanket - Black interior
3 195 kr
- +